2 Server Management
2.1 Core Administrative Tasks
2.1.1 Configuration Files
RStudio Server uses several configuration files all located within the
/etc/rstudio directory. Configuration files include:
|rserver.conf||Core server settings|
|rsession.conf||Settings related to individual R sessions|
|notifications.conf||Notifications to be delivered to user sessions|
|profiles||User and group resource limits|
|r-versions||Manual specification of additional versions of R|
|ip-rules||IP access rules (allow or deny groups of IP addresses)|
|load-balancer||Load balancing configuration|
|health-check||Template for content to return for server health checks|
|google-accounts||Mappings from Google accounts to local accounts|
|file-locks||Configuration for file locking|
|login.html||Custom HTML for login page|
rsession.conf files are created by default during installation however the other config files are optional so need to be created explicitly.
notifications.conf file is created, but its entries are commented out as an example.
Whenever making changes to configuration files you need to restart the server for them to take effect. You can do this using the
restart command of the server management utility:
$ sudo rstudio-server restart
2.1.2 Stopping and Starting
During installation RStudio Server is automatically registered as a daemon which starts along with the rest of the system. The exact nature of this will depend on the init system in use on your system: - On systems using systemd (such as Debian 7, Ubuntu 15, and RedHat/CentOS 7), this registration is performed as a systemd script at
/etc/systemd/system/rstudio-server.service. - On systems using Upstart (such as older versions of Debian and Ubuntu, and RedHat/CentOS 6), this registration is performed using an Upstart script at
/etc/init/rstudio-server.conf. - On systems using init.d, including RedHat/CentOS 5, an init.d script is installed at
To manually stop, start, and restart the server you use the following commands:
$ sudo rstudio-server stop $ sudo rstudio-server start $ sudo rstudio-server restart
To check the current stopped/started status of the server:
$ sudo rstudio-server status
2.1.3 Managing Active Sessions
There are a number of administrative commands which allow you to see what sessions are active and request suspension of running sessions.
To list all currently active sessions:
$ sudo rstudio-server active-sessions
18.104.22.168 Suspending Sessions
When R sessions have been idle (no processing or user interaction) for a specified period of time (2 hours by default) RStudio Server suspends them to disk to free up server resources. When the user next interacts with their session it is restored from disk and the user resumes right back where they left off. This is all done seamlessly such that users aren’t typically aware that a suspend and resume has occurred.
To manually suspend an individual session:
$ sudo rstudio-server suspend-session <pid>
To manually suspend all running sessions:
$ sudo rstudio-server suspend-all
The suspend commands also have a “force” variation which will send an interrupt to the session to request the termination of any running R command:
$ sudo rstudio-server force-suspend-session <pid> $ sudo rstudio-server force-suspend-all
force-suspend-all command should be issued immediately prior to any reboot so as to preserve the data and state of active R sessions across the restart.
22.214.171.124 Killing Sessions
If you are for any reason unable to cooperatively suspend an R session using the commands described above you may need to force kill the session. Force killing a session results in SIGKILL being sent to the process, causing an immediate termination.
To force kill an individual session:
$ sudo rstudio-server kill-session <pid>
To force kill all running sessions:
$ sudo rstudio-server kill-all
Note that these commands should be exclusively reserved for situations where suspending doesn’t work as force killing a session can cause user data loss (e.g. unsaved source files or R workspace content).
2.1.4 Taking the Server Offline
If you need to perform system maintenance and want users to receive a friendly message indicating the server is offline you can issue the following command:
$ sudo rstudio-server offline
When the server is once again available you should issue this command:
$ sudo rstudio-server online
2.1.5 Upgrading to a New Version
If you perform an upgrade of RStudio Server and an existing version of the server is currently running, then the upgrade process will also ensure that active sessions are immediately migrated to the new version. This includes the following behavior:
- Running R sessions are suspended so that future interactions with the server automatically launch the updated R session binary
- Currently connected browser clients are notified that a new version is available and automatically refresh themselves.
- The core server binary is restarted
To upgrade to a new version of RStudio Server you simply install the new version. For example on Debian/Ubuntu:
$ sudo gdebi <rstudio-server-package.deb>
$ sudo yum install --nogpgcheck <rstudio-server-package.rpm>
For openSUSE / SLES:
$ sudo zypper install <rstudio-server-package.rpm>
2.2 Administrative Dashboard
RStudio Server includes an administrative dashboard with the following features:
- Monitoring of active sessions and their CPU and memory utilization;
- The ability to suspend, forcibly terminate, or assume control of any active session;
- Historical usage data for individual server users (session time, memory, CPU, logs);
- Historical server statistics (CPU, memory, active sessions, system load); and
- Searchable server log (view all messages or just those for individual users)
The dashboard can be an invaluable tool in understanding server usage and capacity as well as to diagnose and resolve problems.
2.2.1 Enabling the Dashboard
The administrative dashboard is accessed at the following URL:
The administrative dashboard is disabled by default. To enable it you set the
admin-enabled option. You can also specify that only users of certain group have access to the dashboard using the
admin-group option. For example:
Note that changes to the configuration will not take effect until the server is restarted.
2.2.2 Administrator Superusers
You can further designate a certain user or group of users as administrative “superusers”. Superusers have the following additional privileges:
- Suspend or terminate active sessions
- Assume control of active sessions (e.g. for troubleshooting)
- Login to RStudio as any other server user
Administrative superusers do not have root privilege on the system, but rather have a narrow set of delegated privileges that are useful in managing and supporting the server. You can define the users with this privilege using the
admin-superuser-group setting. For example:
Changes to the configuration will not take effect until the server is restarted.
2.2.3 Server Log Time Zone
You can control the time zone in which the server logs are displayed in the admin dashboard by the use of the
admin-monitor-log-use-server-time-zone option. For example:
Setting this option to
1 will display the server logs in the server’s time zone. The default value of
0 will display the log times in UTC.
126.96.36.199 Google Accounts Restrictions
Note that the ability to login as other users and assume control of existing sessions is not available if you are authenticating with Google Accounts. This is because Google authentication uses a different user-identity mechanism which isn’t compatible with the way that user session impersonation is implemented.